الأحد 18 أبريل 2021















هو جهاز صوتي  ومع إمكانية إستخدامه كجهاز تصويري و في حالة الرغبة في شراء برنامج التصوير ولمزيد من المعلومات الضغط هنا وهو غير مرفق مع الجهاز .

الجهاز صناعة ألمانيــــة والعمق لغاية أكثر من  3.40  متر تحت الأرض ويتم تميز معدن الذهب عن المعادن الآخرى بالصوت وبالشاشة و لا يحدد العمق تحت الأرض ويحدد الحجم المدفون تحت الأرض وسهل الإستخدام ومتوفر كتالوج إنجليزي وفيديو تعليمي ولا يتأثر بالأحجار البازلتية وهي خليط المعادن الموجودة في تركيبة بعض الصخور  

للشراء ولمزيد من المعلومات

مركز المبيعات والشحن الخارجي 

 واتس آب رسائل  0096566414184

أو مراسلتنا عبر الإميل الإلكتروني


خدمة الشحن متوفرة لكافة انحاء العالم عن طريق

كبرى شركات الشحن الجوي والبري والبحري


The LORENZ DEEPMAX Z1 series detectors are some of the newest developments in the field of Pulse GBS metal detectors. It is probably one of the most sensitive and stable metal detecting devices of its kind presently available. The LORENZ DEEPMAX Z1 is the result of many years of research and development. A lot of efforts have been put into making this new product and especially in the new improved metal classifications and automatic ground balancing facilities

The Pulse GBS (Pulse Ground Balancing System) is especially suitable for searching at depth. The performance of this electronic device is almost unaffected by salt water, most types of mineralized grounds or temperature changes. Specially designed electronics cancel out signals from the ground while offering stable signals from the metal objects. The DEEPMAX Z1 is therefore a reliable tool to locate at great depths even under the worst environmental conditions. A new improved circuit design suppresses interference from power lines and a power pulse technique produces very accurate signals to obtain very high detection depths

The LORENZ DEEPMAX Z1 is a high quality specialist Detector and it is designed to be used with both, small or large coils. Large coils offer extreme depth capabilities for big metal objects because of the strong and deep going magnetic field produced. Small coils are preferably used while searching for small objects like single coins or gold nuggets

This model offers a great range on non-ferrous metal objects in general. A very simple operation is guaranteed by a specially developed LC Display and a minimum amount of controls. At the same time this detector model offers a number of features which are new for a pulse metal detector. Quality electronics and very special designed electronic – circuitry produce benefits in terms of ease of use as well as sensitivity

The LORENZ DEEPMAX Z1 is based on the non-motion Pulse GBS (Pulse Ground Balancing System). Short and intensive magnetic pulses are emitted by means of a search coil first. Those magnetic pulses produce eddy currents in conducting materials like metal objects for example. Said eddy currents will be kept in a metal object and will die away after the magnetic pulse emitted by the search coil has turned off. This is the reason why it is possible to detect those eddy currents during the time delayed receiving phase by means of the same search coil which now acts as a receiving coil. A rather complicated electronic circuitry is necessary to detect those tiny voltage changes and has to separate that particular signal from interference also received. The signal has to be amplified to drive an audio stage with voltage controlled oscillator (VCO), which emits an audible signal either by headphones or built-in loudspeaker when a metal is in the near of the field of the search coil.
Eddy currents produced in a metal object by means of a pulsed primary field, will die away differently depending on the conductivity of the metal object. The classification circuit therefore gives a visual time delay reading for the eddy currents received over a certain period of time. In addition a ferrous/ non- ferrous indication for every metal being detected is working when a double D coil is in use. This gives further information on the probable kind of metal being located as well as the audio sound emitted, which makes it easy to predetermine the exact place and the size of the buried metal object.


The Pulse GBS principle has got the advantage of using large diameter coils and high transmitting power. This is especially necessary when searching at depth. Frame mounted cable coils of different size and shape can be connected to the LORENZ DEEPMAX Z1 without any adjustments
A special adaptation circuit has been added to the Detector to suit with different coil systems automatically. This ensures extreme depth capabilities with any coil connected. When enlarging the search coil diameter the sensitivity to bigger objects will also rise. At the same time smaller objects will be located less sensitive. This is particularly desirable when locating large objects while ignoring small bits. Large coils offer very high detection ranges. Even in difficult soils where magnetic iron oxides are present the LORENZ DEEPMAX Z1 will offer extreme depth capabilities for both ferrous and non-ferrous metal objects when the Ground Balancing System is in use. Other systems often suffer from ground effects which reduce the depth range in the ground. The LORENZ DEEPMAX Z1 will be able to locate objects at almost the same depths either in most types of ground or ”in air tests”. The high sensitivity of the DEEPMAX Z1 to non- ferrous metal objects like gold, silver and copper together with the new target analysis make this detector an outstanding device for many different locating purposes
The DEEPMAX Z1 gives a visual indication on the LC Display for every metal being located. This time delay reading producing a number between 000 and 099 helps to classify metal objects. The target classification circuitry is only in some cases affected by the size of a metal object and therefore identifies small coins as well as large pieces of metal. The LORENZ DEEPMAX Z1 also offers a sophisticated and refined ferrous / non- ferrous target analysis which works more stable on difficult soils in conjunction with the 26cm or 35cm double D search coil. The Detector also emits an audible sound by way of either a speaker or headphones. Detection depths achieved (in air tests) are almost the same in many types of soils and therefore considerably higher than those possible with standard pulse induction or sine wave VLF – TR Detectors

The DEEPMAX Z1 was developed to provide a number of features including high sensitivity and stability together with easy operation. The amount of controls was therefore reduced and a calibration of the Detector to our factory settings was also made to guarantee best results in the field

  • Highly sensitive to all kinds of metal
  • Stable operation on mineralized ground or salt water with Pulse Ground Balancing System
  • Reliable / simple operation with few controls and customized LC Display
  • Exact pinpointing with large coils
  • Very easy and effective detection of large areas
  • Rugged, refined mechanical construction with water and dust protected electronics unit
  • A variety of search coils are available for different detection purposes
  • Automatic adaptation of different coil sizes and coil designs to the electronics
  • Small unwanted metal objects can either be identified or eliminated
  • Fast audio response speed with different audio settings
  • Logarithmic audio response and intensity bar graph reading for easy pinpointing
  • Battery check with audio alarm tone
  • Calibrated static (non-motion) target classification with visual conductivity/ time delay reading
  • Improved ferrous/ non-ferrous identification
  • Precisely adjustable audio-threshold
  • Stable static response (acoustical and visual)
  • Waterproof search coils
  • Interchangeable rechargeable NIMH Battery pack for worldwide operation, declared as dry cells!
  • Fast charge electronics for worldwide operation 90-265V AC/ 50-60Hz
  • Car charger for 10-30V DC supplies available as accessory
  • Frequency and Filter function for low frequency EMI interference elimination
  • Automatic ground calibration retuning facility
  • Different Delay and Sensitivity settings to eliminate small objects or for easy pinpointing
  • Extreme detection depths for very large metal objects
  • Specialized on gold and improved detection range on low conducting metal pieces
  • Low frequency interference elimination circuitry for less interference in urban areas
  • High dynamic range for extreme ground signals and easy pinpointing
  • Optimal performance for the detection of small objects like coins or other non-ferrous objects
  • Single or dual, induction balanced or differential coil designs can be used
  • Multi sensor trigger detection (MST) with several search coils working at the same time without interfering each other. Please ask for details
  • Easy to use data logger function works with additional Hard- and Software kit to generate six 2D image and six 3D surface maps from the scans being taken. Each map is different depending on the electronic analysis method and therefore can be the key to the probable kind of metal buried in the ground
  • GPS based meter, Track, Field and Compass Heading information, makes it easy to work with the data logger
  • New search system circuitry with all new functions
  • Signal strength bar graph, time delay reading, ferrous/ non-ferrous icons, battery condition and all the mode settings are displayed simultaneously on a large LC Display
Detection depths
Metal object / Search coil 35cm DD-coil 45cm coil 1 x 1m double frame square 1,5 x 1,5m double frame square
X: Outside the range of the coil. Detection depths recorded using the medium air; DELAY4/GND4, SENS5. Detection depths can differ depending on different ground or delay settings. With bigger metal objects far higher detection depths can be expected.
Gold nugget d = 0,5 cm 28cm 30cm(X) X X
Silver coin d = 2,5 cm 50cm 55cm 50cm(X) X
Brass plate 10 x 10 cm 100cm 110cm 145cm 170cm
Soft drink can 0,33 l 120cm 130cm 165cm 200cm
Iron box 30 x 18 x 15 cm 170cm 200cm 280cm 340cm

Data Logger Hard- / Software kit

To generate color, image, surface or contour maps with the Lorenz DEEPMAX Z1, additional Hard- and Software is necessary. A very sophisticated 6 channel data logger function of the DEEPMAX Z1 metal detector will take simultaneously six channels of data when you go over the ground and stores the information into memory when this function is selected

After recording field data the Surfer Software easily and accurately transforms the stored data into color, contour, surface, image or vector maps on a computer in minutes

An additional Scripter Software will therefore automatically generate twelve maps with each field. Six are two-dimensional and six three-dimensional. The operator can therefore choose between different gridding and mapping methods

The LORENZ DEEPMAX Z1 Data Logger Hard/ Software kit developed by Lorenz Detecting Systems is first of all easy to use, very accurately working and affordable. Only three controls of the DEEPMAX Z1 will make data acquisition a pleasure for both beginners and professionals like engineers, geologists, archaeologists, scientists and many more. The users will investigate mainly for waste disposal, meteorites, or lost aircrafts

No non- sense functions will confuse the operator. Six different maps will be generated simultaneously when covering the ground with multiple tracks. Each scan/ map is different depending on the electronic analysis method and therefore will not only give different sensitivity ranges but can be the key to the probable kind of metal buried in the ground. There is clearly a difference in the signature metal objects and ground conditions will give for example

Areas of disturbances in the scans will directly lead to the different metals or ground signals and therefore can be classified in some ways. The operator therefore can use the different scans to his advantage in order to choose between the objects of most interest only by comparing the different scans/ maps. Three delay channels will produce maps with different sensitivity to small and large metal objects. Two ground channels will enable the operator to generate maps with no ground response but Z dimensions and directions for different decay curves of the eddy currents produced in a metal object. In addition the conductivity reading channel will display the delay of the eddy currents of each signal with a specific color to give further information on the probable kind of metal in the ground. No matter how strong the ground is mineralized or how many different metals are located in close proximity, this new device will ensure very good results even with difficult surrounding conditions. Faults produced by the operator or the environmental conditions like overload signals from nearby metal objects for example will be immediately seen when comparing the six channels. In addition GPS data is also recorded from a supplied GPS module to support the user with a compass function or to find the different fields after recording again

For the professional users additional Hard- and Software will be available for storing positioning data from GPS and several DEEPMAX Z1 detectors

Although the detector can be used with smaller search heads the data logger function is mainly developed for larger metal objects being at least 6cm x 6cm in size. Therefore frames of 1m x 1m or even bigger should be in use to achieve best results

To analyze the different pictures generated with the software refer to the following instructions. Compared to many other systems the Lorenz DEEPMAX Z1 will not only generate one or several graphic representations with different sensitivity ranges for the same metal objects but also gives additional information on the probable kind of metal being located

The advantages of the six channel data logger are as follows

  • False or overload data will be easily recognized on one or two of the maps. At the same time you will find useful data on at least one or two channels. When looking at the different maps/pictures select only these with no ground signals or with the stronger indications to avoid investigating on the small junk objects like foils, nails, magnetic soils or littered ground near the surface.
  • Some signals appear on one scan and disappear on others to give the operator more advanced information on the kind of metal (decay of the eddy currents) or the surrounding ground conditions
  • It is possible to separate two or more different metal objects which give only one large indication in the Delay channels but two on the conductivity reading or Ground channels
  • Some ferrous metal objects lying horizontally in the ground will cause a special triple signal with two high and a low indication when looking at the Ground channels
  • Signals with a fast decay of the eddy current like foils, thin plates small nails will generate a negative peak in the vertical Z direction in Ground 1 and 2 channels, At the same time Metal objects with a long decay of the eddy currents like massive copper, bronze, aluminum or silver will cause a positive peak in Z direction. Ferrous metal objects will only give weaker signals and therefore a small indication in Z direction (in the three dimensional surface maps only)
  • When looking at the Ground channels most of the ground and some of the smaller ferrous items will no longer be displayed comparing them to the Delay channels
  • On the conductivity reading pictures stronger signals which generate a conductivity reading will produce mainly a single color dot corresponding to the delay reading on the display of the DEEPMAX Z1. Neutral ground will cause a purple indication. Different nearby metal objects lying in close proximity will give different colors in most cases for better selection. See table of conductivity reading indications with a 1m x 1m frame coil



    Color on conductivity reading channel corresponding , possible metal object conductivity reading without Data Logger
    Purple No metal or signal to weak No reading/ neutral
    Blue Thin Foil 00-10
    Green Small ferrous nail 15-40
    Yellow Ferrous metal object 45-60
    Orange Non- ferrous metal object 65-75
    Red Large Non- ferrous metal object 80-99


Equipment – DEEPMAX Z1

LORENZ DEEPMAX Z1 detector only (without coils)

  • Plastic carrying case with foam padding
  • LORENZ DEEPMAX Z1 electronics control box
  • Adjustable shoulder and belt strap with detachable rechargeable battery pack
  • Fast charger with wide range AC-input (90-265V)
  • Euro AC adapter (standard)
  • Operating manual (English/ German)
  • Stereo headphones with four way connector


LORENZ DEEPMAX Z1 Detecting kit includes in addition

  • 1m x 1m frame coil with carrying straps
  • Carrying bag for 1m x 1m frame coil
  • Telescopic S pole, consisting of three rods
  • 35cm DD- coil



LORENZ DEEPMAX Z1 Data Logger Hardware/ Software kit

  • Golden Software SURFER single user license
  • GPS- Module
  • USB adapter cable for data transfer
  • USB-Stick with Lorenz Data Converter Software

This kit was made for use with the DEEPMAX Z1 built-in Data Logger function. To generate colour maps an additional computer with following system requirements would also be necessary, but not included with this kit: Windows XP SP2 or higher; Vista; 7; (Trade Mark of Microsoft), 1GB RAM, 100MB free hard disk space, 1024×768 or higher monitor resolution with a minimum 16-bit colour depth.


Specifications – DEEPMAX Z1

Electronics control box: 120x122x85mm
Carrying case for LORENZ DEEPMAX Z1: 400x300x220mm
1m x 1m frame coil (collapsed): 1080x150x150mm
Extended S-rod length: 1550mm
Collapsed S-rod length: 1030mm
Disassembled S-rod length: 690mmWeights
LORENZ DEEPMAX Z1 electronics control box: approx. 1300 g
Shoulder and belt strap with mounted external battery pack: approx. 3000 g
Carrying case with LORENZ DEEPMAX Z1 inside: approx. 7000 g
Telescopic S pole: approx.600g
26cm single coil: Weight approx. 500g*
26cm double D coil: Weight approx. 600g*
35cm single coil: Weight approx. 600g*
35cm double D coil: Weight approx. 800g*
45cm single coil: Weight approx. 700g*
1m x 1m frame coil with cable inside tubes: Weight approx. 2600g*
Universal cable coil 8m perimeter (can be used for 0,7mx0,7m; 1mx1m; 2mx2m and compensated 1m x 2m frame mounted search coil): Weight approx. 600g*
Universal cable coil 12m perimeter (can be used for 1mx1m; 1,5mx1,5m; 3mx3m frame mounted search coil): Weight approx. 900g*
1mx1m double frame coil kit: Weight approx. 7300g*
Y-Adaptor cable: Weight approx. 100g*
*all weights taken with connecting cable and connector! The coils ranging from 26cm to 45cm diameter need a telescopic S pole for operation

Electrical data
Search-frequency with small/large search coils connected: approx. 2000 / 1000 pulses per second
Audio target response voltage controlled oscillator VCO and volume/ threshold control: 0 – 4000 Hz
Power source: external rechargeable NiMH battery 12V/ 9,5Ah (declared as dry battery)
Usage time: approx. 7 to 14 hours depending on temperature and connected coil
Battery charger: rapid charger with 90-265V AC/ 50-60Hz for world-wide operation
Recharge time: approximately 6-8hours depending on battery condition and ambient temperature
Operating temperature: – 5°C to + 50°C
Detection depths: see chapter 10
Data logger: six channel data acquisition, supported by GPS
Storage media: internal memory
Number of fields: 99
Sampling rate: 12 per second
Resolution: 24 bit

GPS Module:
Channels: 50 channels
Sensitivity -162 dBm
Frequency L1, 1575.42 MHz
C/A Code 1.023 MHz chip rate
Target precisions: Position Horizontal 2.5m CEP, 2.0m SEP with SBAS
Date: WGS-84
Protocol: NMEA-0183 V3.01 GGA, GSA, GSV, RMC, VTG
Performance: Operating temperature: -20°C to +60°C
Dimensions: 65x 45 x 22 mm

The LORENZ DEEPMAX Z1 is practically service free
The electronics control box and the other components should always be kept clean and dry. This is particularly important for the plugs and sockets, which should never be stored when being wet. The electronics control box is water and dust protected but it should be avoided to immerse the unit in water. All search coils available for the LORENZ DEEPMAX Z1 are waterproof up to the connector. All the connectors should be kept dry
Design and specifications subject to change without notice



اضف رد