EMFAD® – UG12 DS
هو جهاز تصويري جيوفيزيائي ثلاثي وثنائي الأبعاد صناعة ألمانية ويبحث عن جميع المعادن والكيبلات والبايبات والكهوف تحت الأرض ويعمل بنظام التصوير تحت الأرض عن طريق الشاشة الملونة للمشاهدة الحقيقة تحت الأرض وليس كباقي الأجهزة تكون الصور مخزنة مع التمييز بين المعادن والعمق لغاية 12 متر تحت الأرض ويحدد العمق والحجم والمعدن تحت الأرض عن طريق الشاشة مباشرة ولا يتأثر بالأحجار البازلتية وهي خليط المعادن التي تأثر علي أدائه وسهل الإستخدام مع كتالوج عربي و إنجليزي
للشراء ولمزيد من المعلومات
مركز المبيعات والشحن الخارجي
واتس آب رسائل 0096566414184
أو مراسلتنا عبر الإميل الإلكتروني
sales@66414184.com
خدمة الشحن متوفرة لكافة انحاء العالم عن طريق
كبرى شركات الشحن الجوي والبري والبحري
The EMFAD-measuring method is based on the evaluation of variations of electromagnetic field data caused by anomalies in the subsoil. It can locate – conductive materials, such as metal, pipes, barrels, cables, reinforced concrete,electrolytic effluents, etc. – irregularities like cavities, graves, faults, shafts, ground fills, deposits, caves,tunnels, landfills. The EMFAD-Technology has been successfully deployed in practice under variousdifferent climatic and geological conditions by professionals as well as by hobby researchers. Fields of application predominantly are archeology, geophysics, geology, hydrology and treasure loacating (treasure hunting) in very different application areas as archeological sites, industrial waste sites and waste deposits, building lots, mining ares, street- construction sites, military practice sites and other soil investigations. Technical Information: Electromagnetic sensor system – Works world wide in passive mode with external Radio Stations and in active mode with own Transmitter/Generator Receiver frequency range – External Frequencies: 0-160 kHz; own Transmitter/Generator: 19, 24, 33, 70, 90 and 124 kHz Microprocessor controlled measurement – Automatic mode: Probe recording and Readings are stored automatically 2/second, 1/s, 1/2s and 1/4s – Manual mode: Manual triggering, Readings stored automatically via Bluetooth on TABLET-PC Presentation of Measurement – In real time on TABLET-PC Measuring point density – Dependent on step length, step speed and distance between measured profiles >= 10 cm Depth of localisation – Overview >= 12 m; Detail up to 12 m Weight – 2.5 kg Operation time – Receiver/Bluetooth: 8 h; Transmitter/Generator: 8 h; TABLET-PC 9 h Anbient temperatur – -10 to +55 C Data processing – With recording- and presentation software EMFAD-TAB in real time on TABLET-PC – With evaluation software EMFAD-ScanDS for 2D and 3D presentation, modeling and printing Data export For further processing and documentation to Microsoft-EXCEL and SURVER from Golden Software or any other program, which handles ASCII-Files
Scope of supply complete system: – EMFAD-UG12 DS, Receiver – EMFAD-TRX2, Transmitter/Generator – Carrying bag for TABLET-PC – Recording- and presentation software EMFAD-TAB – Evaluation software EMFAD-Scan – User manual for Hard- und Software – Accessories (Battery charger, Cable, Antenna loop – Aluminium-Transportkoffer , Made in Germany
Horizontal method
Main field of application for measurements is the horizontal method. While comfortably holding the device large areas are easy to measure Both antennas can be steered and triggered individually
Vertical method
This method is mainly used for small surveys where a high resolution is needed. Both antennas can be steered and triggered individually
EMFAD® – ScanDS
Evaluation of data
EMFAD® – ScanDS is data processing software that performs both the processing and display of measurements of abnormal variations in conductivity in the subsoil. It provides representations in 2D or 3D views, interpretations, modelling, and documentation/printing of the measured results. The operation of the program and its processes are simple to use and in most cases the individual menus are self-explanatory
The data collected, viewed in real time and saved with EMFAD® TAB on the TABLET-PC can be evaluated and processed with the specialized software EMFAD® – Scan at the site with the Tablet-PC or later on any Notebook or desktop-PC
The handling of the program is very simple. After preprocessing with EMFAD® – ScanDS, the data can be exported to other programs that can import ASCII-files
3D-View
The three-dimensional color graphics can be rotated by moving the mouse pointer while holding down the left Mouse button
The spatial position of the Anomalies can be easily determined with the coordinates of the X- and Y-axis. The assignment of colors for
minimum and Maximum is freely selectable
2D-View
Without grid lines in the 2D view the Location/Position of the anomalies becomes more obvious After double-clicking in the graph above
an anomaly a red line will show up. This Line represents a profile, which is viewed in the upper window over the total length. In this
window the waveform can easily be followed and the exact location of anomalies can be determined
Numeric-View
In the numerical view, the raw data from each measurement point and each profile are displayed. With the analysis of the raw data
electromagnetic disorders, that may have affected the measurement, can easily be recognized
EMFAD® – TAB
The TABLET PC program EMFAD-TAB is used for data acquisition, data storage and data representation with the subprograms Spectrum, Setup, Survey and Plot
With EMFAD-TAB the data of a selected frequency is displayed graphically in real time on the TABLET PC during the measurement recording. Overall, however, seven default frequencies are available. The raw data of the non-selected six frequencies are also automatically stored during the measurement and can be displayed, by only one measuring path, for detail evaluation in EMFAD-Scan
Setup
In “setup” all necessary inputs for a measurement are made
Spektrum Frequency analysis
With “spec”Radiostations can be searched and stored on the spot if not already stored as default-frequency
Survey
In “survey” data recording and viewing is made in real time
Plot
With “plot” anomalies can be located without storing the data
EMFAD® – TRX2