هو جهاز البحث عن مسافات بعيدة إستشعاري والصناعة يونانيــــــة ويبحث عن الذهب والفضة والحديد والنحاس والرصاص والألمنيوم والبرونز والمجوهرات والمياه والكهوف والجهاز يبحث عن إشعاعات المعادن المدفونة الصادرة منهما بفترة تزيد عن 5 سنوات تحت الأرض والعمق لغاية 7 متر تحت الأرض والمدى الأمامي 1600 متر ويحدد العمق والحجم تحت الأرض وسهل الإستخدام ومرفق معه كتالوج إنجليزي وفيديو تعليمي وكفالة لمدة 3 سنة ولا يتأثر بالأحجار البازلتية نهائيا وهي خليط المعادن الموجودة في تركيبة بعض الصخور
للشراء ولمزيد من المعلومات
الإتصال علي المعرض
0096522638161 / 0096522598896
الخط الساخن الموبايل 0096566414184
أو زيارة المعرض دولة الكويت – حولي – شارع إبن خلدون
مجمع الصامته – الميزانيين 13 – بجانب بنك الخليج
أو مراسلتنا عبر الإميل الإلكتروني
خدمة الشحن متوفرة لكافة انحاء العالم عن طريق
كبرى شركات الشحن الجوي والبري والبحري
The “DSP inside” our SPECTRA long range locator does it all: it makes millions automatic corrections to the output frequency when it operates, to match the metal programmed, and produces a signal accurate to 0,1 Hz. The result?
only the selected metal is stimulated and no faults.
Digital Frequency Synthesis: scan for gold, silver, copper, bronze, iron, lead, aluminum, diamonds, water, void & other elements. The frequency is fine adjustable by the user at 1 Hz steps.
Digital Ground Balance: analyses ground conditions and automatically selects and visualizes the appropriate waveform to avoid false readings from minerals.
Auto Power On to the ground – APO: SPECTRA long range locator has no “POWER ON” key. it makes a check to the ground conditions, and turns on automatically only in good conductive ground, that absorbs the signal. SPECTRA needs not any probes, cables, filters, external battery: It is a compact design easy to handle. It detects to all directions. The signal transmits at 360 degrees radius, the user is not limited to only one direction.
Τhe “GROUND BALANCING” function. SPECTRA gold locator analyses both the soil mineral content & level of wetness, the result appears as GROUND VALUE identification number, on a scale 00 to 99.
This identification number informs the user of the ground type to be scanned.
The advertised long range locators on the market, are nothing else than frequency generators, simple constructions that are not specialized for ground use. Soils have varying combinations of wetness and minerals. Operating frequency generators, it’s signal transmits on conductive ground but doesn’t penetrate at all on loose ground, or on high mineralized soils user receives false target indications.
The DGB – digital ground balancing feature, was developed for SPECTRA long range locator to assist the reliable target indication, to maintain maximum range and stable operation regardless of the ground type. Even further the “SPECTRA track” system, completes the ground balancing accurately, by selecting variable waveforms on the transmit frequency to match the soil.
SPECTRA long distance locator features a worldwide cutting edge technology invention: DFS “Digital Frequency Synthesis”. The only long range metal detector on the market with signal output from a DSP microprocessor, which is fast enough to run 40 million instructions per second, performing corrections to frequency accuracy automatically.
Every metal has its own specific molecular frequency, up to present long range locators were unable to maintain molecular frequency signal stable enough to make visible only the desired target, faults were common practice from minerals and “ghost” targets due to solar storms and magnetic fields.
Select the metal mode and a counter informs when the SPECTRA locator signal has put enough energy to the ground to start scanning the target. When the counter stops the electromagnetic field is strong enough the message “START SCANNING” alerts the operator to pinpoint the target. All other metal objects in the area are eliminated, and the desired element absorbed enough energy to become visible.
Examples of automatic signal selections due to different soil conditions “whatever the ground SPECTRA long distance locator can handle it, no matter the minerals”
The rods are powered by the Power Module, they are 45 cm long and plated with a special gold layer therefore not suffering oxidation from the human skin PH.
The purpose of the rods is to indicate to the operator that he has faced the energy line between the SPECTRA probe and the target. The rods are held steady and balanced at waist level, and slightly in front of the operator. They are held pointed in a forward direction parallel to each other, and at a distance of 8 to 18 inches apart. The rods will cross when enter the target line.
This unit’s purpose is to power the Antenna Rods. This way the system is not self-potential. By increasing user conductivity, the power module permits everyone to be a successful user.
Power module features a new Weight Check Control (W.C.C) The power module can determine a target’s weight after a target indication has been verified. The weight check is controlled by a rotary knob on the power module.
Set low amplification and only large quantities in Kilograms are located. Select high amplification and smaller quantities corresponding to grammars also are realized. The unit contains a 9VDC battery for a power supply.
SPECTRA long range locator specifications
* 16 bit processor 40 MIPS speed – 160 Mhz clock * 32 bit DDS synthesizer chip to output waveforms * Digital frequency synthesis x 20 PLL frequency generator with automatic frequency stabilizer at 0.1 Hz * Programmes to scan gold, silver, copper, bronze, lead, iron, aluminum, diamonds, water, void & free mode * Manual frequency selections at 1Hz intervals * Dot Matrix L.C.D 64 x 128 pixel resolution & 8 level backlight * 80 mA battery consumption / 180 mA at full backlight. Constant battery condition indication * “APO” – Automatic power on to conductive ground * “DGB” – Digital ground balance to cancel interference of ground minerals * Soil mineral content indication scale 00 – 99 & icon * “SPECTRA track” – Variable waveform according to the ground type * “SPECTRA graph” – Real time waveform animation * On screen counter for signal inductance, alerts to start scanning when the energy field is strong enough * BNC ground probe and main unit in one piece – no cables – compact design * Unit rotates 360 degrees for easy viewing of screen * Tactile keys & sound indication * “WCC” – Signal receiver with target Weight Check Control, power amplifier & gold plated “L” rods * Receiver antennas do not suffer from oxidation due to human skin PH * Distance up to 1600 m. range. Depth 7 m.